Volvo Penta 3860881 trim cylinder repair set and pre-sealed gland/ end cap

Description

Volvo Penta 3860881 cylinder rebuild set
If your trim cylinder ram is leaking, fix it with our rebuild set. Buying a new steering cylinder is not necessary provided that there is no un-repairable damage to the cylinder or its parts.
In most cases the leakage is caused by not using the boat for some time; in the mean time foul is growing on the piston rod of the cylinder. When starting sailing again the foul damages the oil seals. Of course, the leakage can also occur due to aging so that the seals are just worn out.
The gland/cap and seals in this rebuild set have been tested on various boats and are of very high quality.
This set is at least compatible with rams for the following drives:
·
SP-C, SP-E
·
DP-A, DP-A1, DP-A2, DP-B, DP-B1,
DP-C,
DP-C1,
DP-D, DP-D1,
DP-E, DP-G
·
DPX-A,
DPX-C, DPX-R,
DPX-S
, DPX-S1
The original Volvo Penta OEM-numbers for these cylinders are
3860881,
872837
and
854695
. Other replacement numbers are
RECKITDP
.
Contents repair kit (See drawing):
1)
One piece:
Special molded high performance PU piston ring (To be fitted)
2)
One piece: Energizer O-ring piston ring (To be fitted)
3)
One piece:
O-ring bolt piston to piston rod (To be fitted)
4)
One piece: Single-piece hydraulic PU seal piston rod inner side endcap (Pre-mounted)
5)
One piece:
O-ring endcap outer side (Pre-mounted)
6)
One piece: NBR wiper seal with SS spring
(Pre-mounted)
7)
One piece: End cap or gland made of high-qrade marine anodized aluminum
Shipping:
Your order will be shipped with regular postage which can take 1-3 weeks depending on your location. Please contact us for alternative shipping options.
After your purchase we will send you an installation instruction by e-mail!