Speedway Universal Splined Sway Rear Bar Stabilizer Kit

Description

Universal application for any chassis or suspension type, Reduces body roll and understeer, Adjustable end links for fine tuning, works with OEM and tubular control arms, 5/8" OD splined torsion bar, Bronze sway bar mount bushings
Speedway Universal Splined Sway Rear Bar Stabilizer Kit
Sku # 91664725
Mfr. Part # 91664725
Condition
New
Brand
Speedway Motors
Sold
Each
Details
Info
Solid steel .650-inch sway bar, heat treated for strength, 26-inch overall length
Splined sway bar arms made from 6061-T6 aluminum, 6-3/4-inches long
Effective sway bar rate of 176 lb/in
Universal rear sway bar fits any chassis style or rear suspension setup
Weld on axle tabs are designed for 3-inch axle tubes, such as the Ford 9-inch
3/8-inch rod-end joints for rear sway bar end links allow for precise adjustments
Weld on chassis mounts are a generous 5-inches long and can be trimmed as needed
Bronze anti roll bar bushings for more effective reduction in body roll
Designed, engineered, and built right here in house at Speedway Motors
Drag Race, Road Race, or Just a Serious Street Car, A Rear Sway Bar Will Help
Adding a rear sway bar to your ride makes a serious handling improvement no matter what you’re asking your vehicle to do. Launch straight at the drag strip? Or take that road course or autocross track corner just a tick faster? What about an emergency evasive maneuver on the street? All these situations are aided by adding a rear stabilizer bar to your vehicle.
The decreased body roll and reduction in understeer that a rear sway bar brings to the table makes you wonder why they were not included from the factory. Truth be told, just about every car coming off the assembly line today has a rear stabilizer bar, but back in the day it wasn’t deemed necessary with the tire contact patch and tire construction/quality of the time. Today’s super grippy plus sized wheel and tire combinations absolutely benefit from adding a rear anti roll bar.
A Rear Sway Bar Built to Take the Punishment, On Track or Off
This isn’t some hollow tube rear stabilizer bar that will fold under pressure. Our splined rear sway bar is a generous .650-inch diameter (5/8-inch) of solid heat treated steel and rides in bronze bushings. The splined ends mount a pair of 6061-T6 aluminum arms that are 6-3/4-inches long, allowing the sway bar to be mounted above or below the axle housing’s center line for plenty of chassis mounting options. Be it a unibody or full frame chassis, our 5-inch long mounting tabs, positioned at 20-1/2-inches apart, provide ample positioning room for access to the sway bar if you wish to change the bar’s diameter to increase or decrease effective rate. The setup, as shipped, is rated at 176 lb/in of rate.
Weld-on axle tabs are designed for common 3-inch axle tube diameter, such as the popular 9-inch Ford housing, but can be ground/modified to fit any axle tube diameter. The included 3/8-inch rod ends act as rear sway bar end links and provide a precise solution for sway bar adjustment to ensure the anti roll bar ends are parallel to the ground and not binding at ride height. The rod end links also provide a more direct and faster sway bar input to the rear suspension than typical rubber or urethane rear sway bar end links. The overall anti roll bar length is 26-inches. Depending upon vehicle and installation location frame rail access may need to be considered for sway bar removal or make the sway bar mount a bolt in with some light fabrication work.
Our universal splined rear sway bar is an excellent value that requires a little effort to install, but the net results of how your vehicle will handle after installation will have you wondering why you didn’t install a rear bar sooner!
Installation Tips
Service parts available include:
Specs
Material Type
Steel
Sold in Quantity
Each
Finish
Natural
Color
Natural
Overall Width
26
Diameter
.650
Position
Rear
Rear Sway Bar Type
Modular
Bushing Material
Bronze
Rear Sway Bar Diameter
.650
Related Items / Suggested Parts
Speedway Splined Sway Bar Stabilizer Kit, 1964-1972 GM A-Body
Shipping
Combined Shipping:
Please take advantage of the “add to cart” button on each listing to get everything in your cart prior to completing checkout. This will ensure you receive a combined shipping rate on your entire order.
Freight Shipping:
Some products are too large for standard ground delivery and must be shipped via truck freight.
Please contact us via eBay Message for a freight shipping estimate.
When possible, please provide a business or commercial address for delivery to eliminate additional fees.
Please ensure the phone number provided is accurate to avoid delays.
Upon delivery, the recipient must inspect the shipment before the driver leaves as there may be concealed damage; please open the carton to inspect the contents. Any visual damage must be noted on the shipping document BEFORE signing for delivery. Any damage not noted before signing for delivery is the buyer’s responsibility. If damage is found, the shipment may be refused, but please contact us as soon as possible and arrangements will be made to have the product replaced and damaged parts returned.
Tech Support
We're here to help before and after your purchase. If you have a question or need assistance with one of our products, please contact us through eBay Messaging and a knowledgeable Speedway Motors team member will be happy to help.
About
Speedway Motors is America’s Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 70 years. Founded in 1952 by “Speedy” Bill Smith – a racer and street rodder himself – Speedway has grown from a one-man operation to become the world’s largest manufacturer, distributor and retailer of street rod and racing products. Our industry-leading fast delivery is the result of same-day shipping from our state-of-the-art, centrally located 500,000 sq. ft. headquarters. Speedway’s size offers customers unmatched product selection and low pricing, while our excellent technical support and customer service have made us a recognized leader in the rodding and racing industries.
Return Policy
We want you to be satisfied with your purchase. If within 60 days after you receive your shipment and you are not satisfied, you may return the item for a refund. Refunds will be processed (1-2) days after the item is received by Speedway. All returned merchandise must be in original factory condition with no modifications or alterations. A restocking fee up to 15% may be applied if items are not in new condition.
Returned merchandise must include all packaging materials, warranty cards, manuals, and accessories. If the items being returned need to be repackaged, there will be a repacking charge. Repack the item in a sturdy box, include a copy of your invoice and complete the form on the back of the invoice. You must ship orders back PREPAID. WE DO NOT ACCEPT COD SHIPMENTS.
All fiberglass items returned will be subject to a 15% restocking charge. No returns on electrical parts, DVDs, and books unless they are defective. Absolutely no returns on special order or closeout merchandise.
Payment
Accepted Payment Methods - PayPal and major credit cards are accepted.
Terms - Immediate payment is required on all listings.
To view states in which sales tax will apply to your order, please visit the “shipping and payments” tab.
Guarantee
Speedway accepts full responsibility for the accuracy of our listings and product representation. If an egregious shipping or description error occurs, we are happy to assist with a replacement or refund.
Disclaimer
Due to our large inventory and the diversity of our product line, the stock photo used may not be an exact representation of the item you are bidding on. Please read all product information carefully before purchase to avoid any order issues.